NORLYS

STAVANGER 5063 Norlys bollard light graphite RAL 7016 LED 12.2 W 3000 K IP65 95 cm

Name: STAVANGER 5063 Norlys bollard light graphite RAL 7016 LED 12.2 W 3000 K IP65 95 cm
Brand: NORLYS

STAVANGER 5063 is a bollard light 95 cm tall with a 20 x 20 cm section, made of powder-coated cast aluminium in graphite RAL 7016. The diffuser is transparent, UV-stabilised polycarbonate, and a silicone gasket and nylon gland close the housing. 1179 lm at the source, 428 lm out — and that is the point of this fitting Norlys publishes both figures, and the gap between them is not a fault but the design intent. The LED produces 1179 lm; 428 lm leaves through the optic, because the rest is deliberately held back: a bollard should light the surface below, not a passer-by's eyes and not a neighbour's windows. A luminaire efficacy of 35.1 lm/W looks modest written down — and that is what every fully shielded park fitting looks like. If you want maximum lumens per watt, this is the wrong class of product; if you want a path lit without light pollution, it is exactly the right one. DALI2 and NightDim The fitting has a DALI2 interface and a NightDim function. The first lets the bollard join a controlled system with light levels set centrally; the second works on its own — the fitting drops its own output in the middle of the night, with no controller and no extra wiring. On a private driveway, where nobody is going to build a DALI installation, NightDim is the feature you will actually use. Resistance: IP65, IK08, aluminium Dust-tightness and protection against water jets (IP65) combine here with IK08 — impact resistance to 5 J. For a bollard standing beside a path, a mower and bicycles, that matters more than the IP rating alone. The operating range is -20 to +45 °C. The aluminium casting and powder coat are covered by a 25-year anti-corrosion guarantee, alongside a five-year warranty on the product itself. Installation needs an anchor bought separately The fitting is secured by three ø9 mm holes spaced 120° apart on a ø145 mm circle — that is, onto an anchor or adapter, and none is included. Norlys offers several: a concreting anchor (1230), a driven ground anchor (1231), an adapter for an existing concrete foundation (1232), a mounting adapter (3087) and a connection box (7662). The choice depends on the ground, so decide it along with the bollard itself. Wiring Terminals accept conductors up to 5 x 4 mm², and loop-through wiring of further bollards is designed for up to 5 x 2.5 mm²; the gland takes cable 8-17 mm across. An inrush current of 12 A over 270 µs needs allowing for when protecting a longer run. Power factor PF 0.95 and THD 7% are figures typical of good outdoor electronics. At 11 kg net, a second pair of hands helps when transporting and setting it. Technical data Manufacturer index: 5063GRFamily: StavangerType: bollard lightDimensions: 20 x 20 x 95 cmNet / gross weight: 11.00 kg / 12.70 kgMaterial: cast aluminium, powder coatedColour: graphite RAL 7016Diffuser: transparent polycarbonate, UV stabilisedSealing: silicone gasket, nylon 6 glandLuminaire wattage: 12.2 WLight source wattage: 9.6 WLuminaire luminous flux: 428 lmLight source luminous flux: 1179 lmSource / luminaire efficacy: 122.8 lm/W / 35.1 lm/WColour temperature: 3000 KCRI: 80Colour consistency: SDCM3Control: DALI2 / NightDimVoltage: ~220-240 VPower factor: PF 0.95THD: 7%Inrush current: 12 A / 270 µsIngress protection: IP65Impact resistance: IK08Electrical class: IOperating temperature: -20...+45 °CPhotobiological risk: RG0 or RG1Service life: 145 000 hPower supply service life: 100 000 hLuminaire fixing: 3 holes ø9 mm on a ø145 mm circle every 120°Terminals: max 5 x 4 mm², loop-through max 5 x 2.5 mm², cable ø8-17 mmAccessories (separate): concreting anchor 1230, ground anchor 1231, concrete foundation adapter 1232, mounting adapter 3087, connection box 7662Warranty: 5 yearsAnti-corrosion guarantee: 25 yearsΕμφάνιση περισσότερων

από 860,31 €

1 προσφορά

↑ Η καλύτερη τιμή αυξήθηκε 5% τις τελευταίες 30 ημέρες

Δείτε τις προσφορές