NORLYS

Norlys Lillehammer 2265BL facade wall light, black, LED 4.5 W, uplight, DALI-2

Name: Norlys Lillehammer 2265BL facade wall light, black, LED 4.5 W, uplight, DALI-2
Brand: NORLYS

The Norlys Lillehammer 2265BL is an outdoor facade wall light shaped as a rectangular block of powder-coated cast aluminium in black (RAL 9005). It shines upwards only, in a very narrow 4° beam, so it draws a thin vertical line of light on the wall above the fitting. Size and facade mounting According to the manufacturer's drawing the fitting is 18.5 cm high and 8 cm wide and projects 11 cm from the wall. It is fixed with two screws through ø5 mm holes spaced 45 × 130 mm and weighs 1.6 kg. The housing is closed by clear safety glass with a silicone gasket, and the cable enters through an EPDM gland; IP65 and IK08 allow it to be mounted outdoors without any cover. Connection is a job for an electrician. The fitting runs on 220–240 V and is protection class I, so it needs a protective earth conductor. The terminals take conductors up to 5 × 1.5 mm² and allow loop-through wiring, so a row of wall lights on a facade can be fed from one line. Norlys also states how many fittings one circuit breaker can take: B10A – 46, B16A – 74, C10A – 74, C16A – 119. Light and control The 2.8 W LED module produces 504 lm, but after the optic 13 lm leaves the fitting at a consumption of 4.5 W. That is intentional: the fitting does not light a path or an entrance, it accents the texture and height of the wall. 2700 K is a warm, slightly yellow light. The driver is built in, and Norlys rates its life at 50,000 hours. Dimming works through a DALI-2 system — a DALI controller is needed, because an ordinary phase-cut dimmer cannot drive this interface. Where it fits Norlys designed it for lighting walls, facades and architectural details. Model 2265 is also available in aluminium, white and graphite.Εμφάνιση περισσότερων

από 259,27 €

1 προσφορά

Δείτε τις προσφορές