Bowi

Black BOWI GWYN 012341 LED work light 36 W 1300 lm 6000 K IP68 12/24 V

Name: Black BOWI GWYN 012341 LED work light 36 W 1300 lm 6000 K IP68 12/24 V
Brand: Bowi

BOWI GWYN 012341 is a black off-road LED work light for a 12 or 24 V electrical system. Twelve LEDs consume a combined 36 W and produce 1300 lm of cool 6000 K light through a 30° beam. Its IP68 aluminium body measures approximately 19 × 7.9 × 8.5 cm, with brackets for tilt adjustment. A 30° beam for off-road work The 30° angle forms a concentrated beam for the area ahead of a vehicle, machine or work position. A cool 6000 K colour gives a crisp technical appearance, although it may create stronger contrast in snow, dust or fog than warmer light. OFF ROAD identifies the intended use. The product data does not establish approval as mandatory road lighting, so markings on the lamp and local requirements must be checked before operation on a public road. 36 W, 1300 lm and twelve LEDs Integrated Power LEDs deliver 1300 lm from 36 W; there is no replaceable bulb or cap. Compared with a wide work light, 30° concentrates more output around the centre. Lumens specify source output, while practical reach depends on mounting height, aim and a clean lens. Temporarily power and position the lamp before final drilling, ensuring reflections from a bonnet, bucket or other equipment cannot dazzle the operator. A 12/24 V supply and circuit sizing The lamp requires a low-voltage 12 or 24 V DC system and must never be connected directly to a 230 V mains supply. Its power implies roughly 3 A at 12 V or 1.5 A at 24 V. Size cable, fuse, relay and switch for voltage, current, route length and vehicle conditions. Observe polarity, protect joints from corrosion and keep wiring away from hot, moving and sharp components. IP68, aluminium and adjustable brackets IP68 denotes a dust-tight enclosure and immersion protection under the manufacturer's defined conditions, but electrical joints still require suitable sealing. The black aluminium housing dissipates heat and should not be covered. Dimensions are about 19 cm long, 7.9 cm wide and 8.5 cm high. The supporting image shows the lamp, side brackets and fasteners. Attach them to a stable structure, then inspect tightness, cable routing and alignment again after the first off-road journey.Show more

from 18,75 €

1 offer

See all offers