Bergmen

Neon Flex VR Bergmen 14W/m 880lm/m 6500K daylight white IP65 24V 16x15 mm — price per 1 m

Name: Neon Flex VR Bergmen 14W/m 880lm/m 6500K daylight white IP65 24V 16x15 mm — price per 1 m
Brand: Bergmen

Neon Flex VR is a flexible line of light by Bergmen in a silicone housing 16 × 15 mm in section: 14 W and 880 lm per metre, 6500 K, IP65, bending vertically. Sold by the running metre. VR means vertical bend The letters in the name are not decoration: this series bends in the **vertical** plane — flat against the mounting surface — to a minimum radius of 20 cm. That sets it apart from side-bending versions and decides which shapes can be made from it: arcs and waves run along a wall or ceiling, yes. Before designing a letter or a logo, check which way each curve has to bend. The section is semi-round, imitating a traditional neon tube, and with a 180° beam the whole face glows evenly, with no visible diode dots. A running metre, not a piece This is cut goods: the price and the quantity refer to **one running metre**, and the material is cut from a 50-metre reel. It can be cut anywhere, and lengths join with push-fit connectors — no soldering, which matters for on-site installation. What does need watching is the length of a powered run: on this 6500 K version the maximum is **10 metres, and only with a double-ended feed** from both ends. Longer runs must be split into sections with separate injections, otherwise the far end visibly dims. The figures that shape the design 14 W per metre for 880 lumens works out at about 63 lm/W — this is a decorative and contour line, not a source of general lighting. At 6500 K the colour is cold daylight: good for technical coving, shopfronts, signage and cool-toned interiors, but it will read harshly in a living room. CRI 80 is enough for edge lighting, not for displaying goods whose colour matters. The supply is 24 V DC — a driver with adequate headroom is needed, counting 14 W for every metre of planned run. Operating conditions and installation IP65 means full dust protection and resistance to water jets, so the product suits bathrooms, covered terraces and outdoor displays. The −20 to +45 °C operating range covers a Northern European winter; storage is permitted from −20 to +80 °C. The housing is white, which with the light off gives a neutral, pale line on the wall. Bergmen covers the product with a **36-month warranty**. Energy efficiency class: G. Specification Manufacturer: Bergmen Series: Neon Flex VR (vertical bend) Product code: 01-002-043-09-03-65-A Sold: by the running metre, cut from a 50 m reel Power: 14 W/m Luminous flux: 880 lm/m Colour temperature: 6500 K (daylight white) CRI: 80 LED count: 120 pcs/m LED type: SMD Voltage: 24 V DC Ingress protection: IP65 Beam angle: 180° Width: 16 mm Height / thickness: 15 mm Bend radius: 20 cm Cutting section: anywhere Max run: 10 m with double-ended feed Housing colour: white Operating temperature: −20~45 °C Storage temperature: −20~80 °C Energy class: G Warranty: 36 months EAN: 5903268420144Mostra di più

da 50,64 €

1 offerta

Vedi le offerte