NORLYS

Lillehammer 2261BL Black LED NORLYS Outdoor Wall Sconce

Name: Lillehammer 2261BL Black LED NORLYS Outdoor Wall Sconce
Brand: NORLYS

Lillehammer 2261BL is an outdoor wall light shaped as a rectangular block of cast aluminium, powder-painted black RAL 9005. Narrow slots at the top and bottom are closed with transparent safety glass. The body measures 18.5 × 11 × 8 cm and weighs 1.6 kg. The light effect it produces The fitting emits in two directions: two 60° beams run up and down the wall. Half of the output goes above the mounting line (ULOR 50%), so the façade gets two symmetrical washes rather than a single pool under the fitting. The LED module itself produces 1008 lm, but 207 lm leaves the luminaire through the narrow slots. This is an accent fitting that draws light on a wall, not a source for lighting a driveway or a terrace. 2700 K is warm, close to an old incandescent bulb, and Ra 80 is enough for architectural lighting; colour consistency between units stays within an SDCM3 ellipse. Mounting and wiring The light is fixed with two screws through ø5 mm holes spaced 45 × 130 mm. It is a safety class I fitting, so an earth conductor has to reach the connection box. The terminals take conductors up to 5 × 1.5 mm² and allow several fittings to be looped through on one line, which shortens the installation of a row of lights along a longer wall. The cable enters through an EPDM gland designed for a round sheath of ø7–10.5 mm. IP65 means resistance to dust and to water jets, and IK08 to an impact of 5 J. The manufacturer allows operation between -20 and +45 °C. Dimming and servicing The fitting works in the DALI-2 system, so the brightness is set from a control unit rather than with a phase dimmer. The driver has a declared durability of 50,000 hours, and replacing it — like replacing the LED module — is a job for a professional; the luminaire is not opened by the user.Mostra di più

da 256,39 €

1 offerta

Vedi le offerte