V-TAC

V-TAC VT-128S LED Floodlight 20 W SAMSUNG PIR Sensor White 6500 K 1510 lm IP65

Name: V-TAC VT-128S LED Floodlight 20 W SAMSUNG PIR Sensor White 6500 K 1510 lm IP65
Brand: V-TAC

V-TAC VT-128S floodlight – 20 W, motion sensor, IP65 VT-128S is a slim outdoor floodlight from the SLIM series with the motion sensor built into the lower edge of the housing, behind the glass. There is no separate sensor on an arm and no extra wiring — the fitting and the detection are one part measuring 157 × 60 × 128 mm and weighing 0.43 kg. It is the answer for a driveway, a garage entrance, a porch or the wall of an outbuilding, where the light should come on by itself and only when someone approaches. 20 W, 1510 lm, cool white 6500 K The floodlight is built on SAMSUNG diodes. At 20 W it delivers 1510 lm, which works out at roughly 75 lm/W, and the 6500 K colour is cool white — a fixed value with no switching. Colour rendering is CRI 80 (with an R9 component of 24) and colour consistency is specified at 2 SDCM, which in practice means no visible difference in tint between units mounted side by side. The 100° beam angle puts it in the wide-beam class: 1510 lm spreads across a broad section of a driveway instead of forming a narrow patch. Peak luminous intensity is 712 cd. Motion sensor and the Cut-OFF function Detection is infrared (PIR) — the sensor responds to the heat of moving bodies. The floodlight also has a Cut-OFF function: briefly switching the supply off and back on puts it into continuous-on mode, and the fitting confirms the change with a short blink. In practice that means the same wall switch can force a steady light — while you work in the garden or carry the shopping in — without opening the housing or adjusting potentiometers. Direct cable connection This variant is fitted with a cable gland through which the supply cable enters the fitting directly. There is no need to mount a separate junction box on the façade — the cable goes into the fitting and is sealed at the entry. Supply is 220–240 V AC, 50 Hz, the power factor is above 0.9 and standby consumption is 0 W. IP65 and an aluminium housing The body is aluminium — the back is ribbed and acts as a heat sink, which on LED fittings translates directly into diode life. IP65 means full dust tightness plus resistance to water jets from any direction, so mounting on an open façade with no canopy is fine. The housing is white and comes with an adjustable U-bracket that lets the tilt be set after the fitting is screwed to the wall. Service life and warranty The declared lumen maintenance factor is 0.96, and the manufacturer quotes 15,000 switching cycles — a figure that matters precisely in a sensor fitting, which turns on and off many times a day. The floodlight carries a 5-year manufacturer's warranty and CE, EMC and RoHS marking. The energy efficiency class is F and the product is registered in the EU EPREL database under number 917354. Specification Type: outdoor LED floodlight with PIR motion sensor, SLIM series Power: 20 W | Luminous flux: 1510 lm | Efficacy: approx. 75 lm/W Light colour: 6500 K, cool white (fixed) CRI: 80 (R9 = 24) | Colour consistency: 2 SDCM Beam angle: 100° | Peak luminous intensity: 712 cd Dimming: no Supply: 220–240 V AC, 50 Hz | Power factor: >0.9 | Standby: 0 W Protection rating: IP65 Dimensions: 157 × 60 × 128 mm | Weight: 0.43 kg Material: aluminium, white Diodes: SAMSUNG | Switching cycles: 15,000 Certification: CE, EMC, RoHS | Energy class: F | EPREL: 917354 Warranty: 5 years Manufacturer code: VT-128S (SKU 20273) | EAN 3800157661317Zobrazit více

od 741,38 Kč

1 nabídka

Zobrazit nabídky